Acomdata external hard drive

Author: h | 2025-04-24

★★★★☆ (4.9 / 3552 reviews)

music intervals calculator

Acomdata Manuals; Storage; external hard drive E5 Serial ATA (SATA) Acomdata external hard drive E5 Serial ATA (SATA) Manuals Manuals and User Guides for Acomdata external hard

needforspeed 7

Acomdata external hard drive - Hard Drives - Facebook

500 GB Titanium II External USB 2.0 Hard Disk Drive uses the same enclosure as this AcomData E5 HybridDrive. The Fantom drive has a standard SATA-to-USB interface without the fancy CD PART and HD PART partition. If you just want a 500 GB hard disk without the password security, the Fantom drive is the way to go. See my review in the "Related Links" section below. Update!The answer is YES! You can use other hard drives in this enclosure.Based on ccl's comment in the discussion thread, you can download the converters to convert the drive between a Secure CD+HDD and the regular HDD. The two utilities are the following:For Windows:xSil251 Switch HDD to CD+HDD_Nomad Mobile Desktop_V1.04_091007xSil251 Switch CD+HDD to HDD 3.5_Toshiba_V1.02_041307For Macintosh:Switch to CD+Secure Nomad for MacCD to HDD Convertor for MacThe first utility shown above converts it to the SecureDrive. The second utility converts the enclosure to a regular HDD. The conversion is done by firmware re-flash of the on-board USB controller. The conversion reformats the hard disk and will cause all your data to be lost. Comments & Discussion >> Does the 500 GB Drive Work Without the Case?Next, I decided to see if the 500 GB FAT32 drive shows up in Windows Explorer when connected via another SATA/USB interface. I used the "Sabrent USB 2.0 to IDE/SATA Cable" to connect the 500 GB SATA drive to my computer. No drive showed up. Looking at the partition, I see an unknown partition. Apparently AcomData used a proprietary partition to hold the virtual CD partition (CD PART) and the FAT32 partition (HD PART).I know I can repartition the drive, but that means the drive will not work inside this USB enclosure ever again. So that's not an option. UpdateAfter performing the SecureDrive to regular HDD conversion mentioned in the prior section, you will be able to use the hard drive in another enclosure. Comments & Discussion >> Related Links AcomData 500 Gb External Hybrid USB2 - Amazon User Reviews AcomData E5 HybridDrive Full-Color Product Sheet AcomData Hard Drive Enclosure for 3.5" IDE Hard Drives User's Guide E5 External Hard Drives FAQs Fantom Drives 500 GB Titanium II External USB 2.0 Hard Disk Drive HybridDrive User's Guide Is your data really protected by USB device passwords? problem with acomdata external hard drive PushButton Backup User�s Guide Sabrent USB 2.0 to IDESATA Cable for 2.5-Inch 3.5-Inch 5.25-Inch Drive with Power Adapter USB-DSC5 - TigerDirect User Reviews Attach | Edit | Revisions Related ContentAttachmentsHard Drive Slides Out From the Front.JPG (45 KB)Peal Off the Back Plate.JPG (39 KB)Unknown Partition.png (17 KB)Unscrew Two Bottom Screws.JPG (32 KB)Unscrew the Circuit Board.JPG (48 KB)Unscrew the Hard Drive from the Bottom.JPG (38 KB)Warranty Void If Seal Is Broken.JPG (24 KB)

issuu search

acomdata external hard drive - Newegg.com

IBook G4, but not in 480mbit mode. Other similar devices like the 1TB Seagate Freeagent work in hi-speed mode on my USB 2.0 ports and hub, but I don't have another machine with USB 2.0 to test the Acomdata on. I'm using Mac OS X 10.5.6. #6 I have that same "hi-speed" USB 2.0 Acomdata 320GB external hard disk, and I can't get it to operate above 12mbit/s on my iBook G4 either. It won't connect to my hi-speed USB 2.0 powered hub at all. It will work when plugged directly into my iBook G4, but not in 480mbit mode. Other similar devices like the 1TB Seagate Freeagent work in hi-speed mode on my USB 2.0 ports and hub, but I don't have another machine with USB 2.0 to test the Acomdata on. I'm using Mac OS X 10.5.6. Try completely erasing the drive and re-format it using Disk Utility. Format it to DOS (FAT-32). That's a long shot but it may work. I suspect those particular AcomData drives have defective firmware and\or drive electronics and probably should have been recalled or returned. Not much you can about that....Another thing you might try: Remove the drive from its case and place it in an external USB 2.0 case. That has a better chance of working.Regards. Shop for your Apple, Mac, iPhone and other computer products on Amazon. We are a participant in the Amazon Services LLC Associates Program, an affiliate program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.

Acomdata 509 External Hard Drive

Beeping,transcend hard disk not detected windows 10,transcend storejet no light,transcend hard drive blue light,External Drive Blinking but Not Detectable Issue,The light on my external drive is blinking,transcend hard drive light not blinking,external hard drive light not blinking,HDD not detected on laptop and light just glowing,lacie hard disk not showing up on computer,Lacie External Hard drive not recognized by Windows 7,External Lacie hard drive not getting detected Error,My NAS does not detect an external disk LaCie Porsche Design,Lacie hard drive now showing up on desktop,LaCie Drive Not Showing on iMac Desktop,Lacie external hard disk not detecting after format,Detecting but Wont Open LaCie External Hard Drive,i have a lacie grand external hard drive that is not Showing,Lacie External Hard Drive Not Showing Up,Lacie 1TB external drive not recognized by windows 10,LaCie Hard Drive not recognized by Windows 10,LaCie Hard Drive not recognized by Windows 7,lacie external hard drive not recognized windows 10,lacie hard drive not showing up windows 10,lacie hard drive not recognized mac,lacie hard drive not showing up windows 7,lacie hard drive not showing up windows 8,buffalo external hard drive not recognized windows 10,Buffalo USB Drive not recognized anymore,USB 3.0 External Hard Drive not recognized in Windows 10/8.1,My Buffalo External Hard drive is not showing up on my PC, nor is disk management,Windows 10 does not recognise my Buffalo Ministation30 External Hard Drive,Can't access my 1TB Buffalo external HD,can't access external hard drive windows 10,Undetected Buffalo external hard drive 1 TB,External Buffalo Doesn't Show In My Computer,Buffalo external hard drive is asking to be formatted,windows 10 external hard drive not showing up,device not migrated external hard drive,usb 3.0 external hard drive not recognized in windows 10,Can't access my 1TB Buffalo external HD,Buffalo Drivestation 1TB External Drive TurboUSB Not Recognised,buffalo ministation not showing in my computer,Pc won't recognize Buffalo ministation 500gb HDD,buffalo. Acomdata Manuals; Storage; external hard drive E5 Serial ATA (SATA) Acomdata external hard drive E5 Serial ATA (SATA) Manuals Manuals and User Guides for Acomdata external hard AcomData was a manufacturer of external, desktop hard drives. Acomdata 509 External Hard Drive. AcomData Drivers . All other trademarks, logos and brand names shown

Acomdata External Hard Drive Troubleshooting

#1 I have an AcomData 320GB external drive that's supposed to operate at USB 2.0 speeds. However, it's registering as a USB 1.1 device, and so it's operating at USB 1.1 speeds, which is unacceptable for what I'm trying to use it for.I believe the problem is the special "CD" partition that the drive contains. It is "unformatable," supposedly, and mounts before the FAT32 other partitions on the drive. I think this forces it into USB 1.1 mode.Anyone have any suggestions or ideas? Or experience with these drives?The problem exists in windows, too, and on other computers, by the way. #2 Dumb question, but is it plugged into a USB 2 port? Do all the new Macs have USB 2 only? #3 Since he is using a Macbook there would be nothing but USB 2.0 ports. Is the drive plugged straight into the Macbook or through a hub? You are the 2nd person here to have issues with that very drive running at 1.1. Does the drive have Firewire also or just USB? #4 I'm plugged directly into the Macbook's USB 2.0 ports. Unfortunately, the drive is only USB, so firewire, of course, is not a current option.Any suggestions about getting rid of that other "unformattable" partition so the drive can just be a normal USB 2.0 drive?AcomData hasn't responded to my e-mails and such and it's been nearly 4 months or so. Probably the worst company I have ever dealt with - I strongly recommend that no one buy anything from them. #5 I have that same "hi-speed" USB 2.0 Acomdata 320GB external hard disk, and I can't get it to operate above 12mbit/s on my iBook G4 either. It won't connect to my hi-speed USB 2.0 powered hub at all. It will work when plugged directly into my

Acomdata External Hard Drive Problem

07-16-2004, 12:11 AM Member Join Date: Jul 2003 Location: Fairfax, California Posts: 1,125 Acomdata Hard Drives Hey guys,Been out on a little road trip for the past week or so, and came back to find that a client of mine bought a 80 GB Firewire hard drive from Acomdata ( I was reading through the Spec Sheet of it trying to find mention of the Oxford 911 chipset, but I've also seen the IEEE 1394 being mentioned alongside Oxford 911 chipsets...do IEEE 1394 and Oxford 911 mean the same thing? Will this thing work for Pro Tools?Sorry to ask here, I should have researched but I have to start a session tomorrow and I thought for sure someone here could provide me with a quick answer. Thanks for baring with me...Ev __________________ ik zei nooit dat! 07-16-2004, 04:31 AM Member Join Date: Apr 2004 Location: Australia Posts: 485 Re: Acomdata Hard Drives Give it a go, then post back here with the results. 07-16-2004, 08:18 AM Member Join Date: Oct 2003 Location: Toronto, Canada Posts: 10,894 Re: Acomdata Hard Drives nightshadecrisis ,IEE1394 is the patent/standard for all "fire wire" communication protocols.The "Oxford 911" is one of the ( and the only Digi approved ) hardware bridge chipset, that is inside the drive enclosure.So, if it says both...you're good to go.happy tooling,cheers, __________________ cheers,AndrewW7 pro 64_i7 3930K_16GB_ Nuendo 6.5.4-7.1.3 / PT 12.4 ------Mac Mini OSX Lion_PT 10.xxAllen&Heath GS R-24M_ full rack of vintage analog boxes _UAD2_Nugen_iZotope_Melda_Waves_Plugin Alliance_DMG and more2.0 and 5.1 monitoring 07-16-2004, 09:35 AM Re: Acomdata Hard Drives Acom drives do NOT have the Oxford 911 bridge chip - better take it back and get one that does. Oxford 911 is a type of chip that translates data between the firewire connection protocol and the IDE/ATA protocol of the drive. It is made by Oxford Semiconductor, hence the name. IEEE 1394 is the specification for Firewire. IEEE stands for Institute of Electrical and Electronics Engineers. Firewire is just the generic name for that particular spec. 07-16-2004, 09:48 AM Member Join Date: Jul 2003 Location: Fairfax, California Posts: 1,125 Re: Acomdata Hard Drives thanks a lot, I'll take it back and grab another drive.I've seen these work fine on Macs, but since I'm going to be going back and forth between Mac TDM and PC PTLE, I dont wanna make a $150 mistake...muchas gracias,evan __________________ ik zei nooit dat! 07-17-2004, 11:01

Acomdata External Hard Drives Manuals

4-Pin 5V 12V AC Adapter For AcomData External Subsystems Hard Disk Drive Power USD $17.54 Condition : New Free Shipping --> Add to Cart--> --> SKU: N/A This site contains affiliate links for which we may be compensated Categories: Computers/Tablets & Networking / Monitors, Projectors & Accs / Monitor Power Supplies Notify me when the price drops We will email you if we find a lower price on this product! Description Technical Specifications : 1 AC input voltage ……100-240VAC (Worldwide), Output: 12V / 5V 2 Input frequency ………50-60Hz 3 Smart device surge protection for over voltage, temperature and short circuit protection 4 Strong built for heavy duty and long usage performance 5 CCC SA CE RoHS certified equipment Compatible Model # or Part #: Replacement Power Supply AC Adapter For Acom Data External Subsystems Hard Drive HD Package Content: --- 1 AC Adapter and 1 power cord for free, whole set. (We are Specialists in OEM AC power adapter for many devices and equipments. Welcome multi quantity quotations. We can custom-make any Voltages, Amperages and various connectors power supply. Please let us know at eBay, if you have any need.) Payment: --- We accept PayPal. --- Payment would Due at 7 days of bidding. eBay will file Unpaid Item Dispute if payment is not received after this time length. Shipping: --- We ship worldwide. --- We have daily shipping. Payment received before 6:00 PM ET would be processed in Same DAY (Express/Expedite Service: before 4:30 ET). --- We only ship to PayPal confirmed address. It's your responsibility to verify your shipping address when you are checking out. --- After the real time shipping processing, address could not be changed. If required to change the shipping address after processed, A fee would apply. International Order: --- We welcome international orders. --- Customers would be responsible for the duties and taxes due. --- If customers choose the expedite/express service, a local phone number is required by the shipping carrier, so please include a phone number when paying the order. Feedback: --- We have reliable and serious commitment, any problems, any issues, please contact us first, report the problem detail, we will be handy to offer help, will take good care of your order problem. If you satisfy our product and service, please leave positive feedback to encourage us. If something goes wrong, please contact us, we will take good care of it,

Acomdata External Hard Drive for sale

Attach | Edit | Revisions Related ContentRecently I bought a AcomData 500 GB Hybrid Drive to store my photos and videos. But this external drive act so weird with its password protection and virtual CD auto-mount, etc. (see my review), that I just have to take it apart and see what it's about.Before disassembling your own HybridDrive, note that you will void the warranty sticker that is on the bottom of the drive (see photo below). After you've gotten over the warranty issue, use an X-acto knife to slice through the warranty stick along the aluminum/plastic seam. You'll need to make two cuts, one for each seam.When you are done with the sticker, carefully peal off the aluminum back (see photo below). Be careful, because the aluminum back panel is a very thin piece of cover. If you don't want to keep it, then you can be as rough as you like. But I think the back aluminum cover looks cool and makes the external drive look whole. Pealing off the aluminum cover, you'll uncover four screws. Unscrew these screws and remove the black plastic cover. Then locate the two small screws under the drive case (see photo below). If you have the vertical stand attached, you'll have to remove it first to find the two small screws. Be careful while unscrew these small screws as the internal components will slide out from the front when you are done. The photo below shows the internal components. The hard drive inside is a Western Digital WD5000AAKS Caviar SE16. It is connected via the 16-bit USB control via SATA.To remove the hard drive, you'll have to unscrew the circuit board first. There are three small screws fastening the circuit board to the metal bracket. Two of the small screws are shown in the photo below. After removing the three small screws for the circuit board, turn the metal bracket over. You'll need to unscrew the four screw shown in the photo below. After removing the screws, the hard drive can be detached from the USB circuit board and removed from the bracket. Comments & Discussion >> Is Hard Drive Replaceable?The question is whether it's possible to replace the drive inside the case with another SATA drive. We might want to do this when the 500 GB drive eventually fails. Or maybe we simply want to use the 500 GB drive somewhere else and swap a different SATA drive into this case.I happen to have a Maxtor DiamondMax 10 6L300S0 300 GB SATA150 HDD that I could use for this test. I plugged this drive into the AcomData enclosure, powered it on, and then plugged it into the computer. An empty CD-ROM drive showed up in my computer, but that was it. No other partition was shown. I couldn't get it to repartition or anything else.The 300 GB drive is formated with NTFS. In the future, I may reformat it into FAT32 to try again. Tip I've recently found that the Fantom Drives. Acomdata Manuals; Storage; external hard drive E5 Serial ATA (SATA) Acomdata external hard drive E5 Serial ATA (SATA) Manuals Manuals and User Guides for Acomdata external hard AcomData was a manufacturer of external, desktop hard drives. Acomdata 509 External Hard Drive. AcomData Drivers . All other trademarks, logos and brand names shown

Miracle Box Thunder Edition

ACOMDATA EXTERNAL HARD DRIVE Anything

#1 Does anyone have this AcomData E5 external hard drive or know anything about it? I'm wondering if it is loud, reliable, etc. I just need one to back up pictures and music. Thanks.AcomData 80GB Euan macrumors regular #2 Nope sorry, I have a Lacie D2 Triple Interface 160GB. Never had any problems. #3 I'm in the market for an external drive too but haven't had a chance to do much research, what are some basic/good specs for a backup drive?Thanks,allison. #4 My recommendation is always to go with a HD enclosure instead. With the rapidly increasing capacities and decreasing costs, it makes more sense to buy an inexpensive internal drive and pop it in an enclosure, rather than paying more for the same capacity in an external model. Plus, then when higher capacities are released, or the existing drive fills up, you can easily swap another one in.Just my recommendations. Otherwise, do a search in the Forums on this topic and you'll find a lot of excellent comments and advice. #5 ~Shard~ said: My recommendation is always to go with a HD enclosure instead. With the rapidly increasing capacities and decreasing costs, it makes more sense to buy an inexpensive internal drive and pop it in an enclosure, rather than paying more for the same capacity in an external model. Plus, then when higher capacities are released, or the existing drive fills up, you can easily swap another one in.Just my recommendations. Otherwise, do a search in the Forums on this topic and you'll find a lot of excellent comments and advice. Nice suggestion ~Shard~, thank you. I'm one of those that is all thumbs. Mechanically challenged. No problem with taking something apart. It is getting it back to working order that causes problems. So far looking at a Lacie. #6 wdlove said: Nice suggestion ~Shard~, thank you. I'm one of those that is all thumbs. Mechanically challenged. No problem with taking something apart. It is getting it back to working order that causes problems. So far looking at a Lacie. Understandable, everyone has different needs of course. Luckily, HD enclosures are getting to the point now where it is essentially plug 'n play - they're really quite straight-forward. Nonetheless, for people who don't want to hassle or that extra little aspect to possibly cause them troubles or wasted time, external drives are definitely a viable option.I have not

AcomData External Hard Drive acomdata model pdhd500use-72

Recover data external hard drive not recognized not detected in pc bios,second internal hard drive and external hard disk not working not showing up in laptop computer disk management windows 7 10 mac device management and beeping hitachi iomega transcend buffalo lacie usb 3.0 sata external hdd not getting being detected undetected unrecognized corrupted unreadable damaged no initialized unallocated io device error, Bplan data recovery software is the fastest way to scan and recover data from undetected hard disk. Bplan can help you find lost data after you have accidentally deleted or reformatted for Windows 7 xp 8.1 vista from transcend buffalo lacie Asus Samsung lenovo Dell hard drive Data loss reasons: External Hard Drive Not Showing Up in Windows or OS X, External HDD not detected on laptop,Windows 10 Not Recognizing External HDD,External Hard Drive not being recognized by Asus,Toshiba External Hard Drive not Detected,External Hard Drive not showing up or detected in Windows,Error USB Device not recognized when you try to access adata on an external USB hard drive,External USB hard drive not recognized in Windows,External HDD not recognized after dropped,Seagate 2 TB External Hard Drive NOT Recognized,Iomega external hard drive not recognized - Windows 7,External Hard Drive not recognized by windows xp,external hard drive not recognized windows 10,External Hard drive not showing up in My Computer and Disk management,external hard drive not showing in disk management,external hard drive not showing windows 10,external hard disk not detected in windows 7,external hard disk not showing,External Drive Not Showing In Disk Manager,Hard drive not showing in disk management or device management,External Hard Drive not detected in Disk Management,External HDD shows up in Disk Management but not pc,External hdd not showing up under computer or local disc,External Hard Drive Doesn't Appear,external hard drive not showing up in disk management windows 10,Second. Acomdata Manuals; Storage; external hard drive E5 Serial ATA (SATA) Acomdata external hard drive E5 Serial ATA (SATA) Manuals Manuals and User Guides for Acomdata external hard AcomData was a manufacturer of external, desktop hard drives. Acomdata 509 External Hard Drive. AcomData Drivers . All other trademarks, logos and brand names shown

Acomdata External Hard Drives User Manuals

Not detected in bios,recover data from hard disk which is not working,recover external hard disk data when it is not detected,recover data from non detecting internal hard disk,recover files from external hard drive not detected mac,recover data from external hard disk which is corrupted,recover data from hard disk which is not detecting,recover data from crashed hard disk,recover data from damaged hard disk,recover data from damaged external hard disk,recover data from crashed internal hard disk,recover data from internal hard disk which is not detecting,recover data from a dead external hard drive,External Hard Drive unallocated only on Windows 10,External HD suddenly became unallocated,external hard drive unallocated not initialized,external hard disk not initialized i/o error,external HDD cannot be initialized due to i/o error in Disk ,Disk Initialization I/O Error,External HDD not detected due to I/O device error,disk unknown not initialized unallocated,Drive D will not initialize I/O error in windows technical,External HDD Not Initialized, Unknown with I/O Error,External hard drive will not initialize displays I/O device,transcend external hard drive 1tb not detected,My computer cannot recognize my StoreJet,StoreJet Transcend Hard Drive cant be found in My Computer,Transcend external hard drive not detected,Transcend External Hard Disk Lights up but doesnt open,Transcend 1TB store jet stopped working,Transcend External HDD Not Detected in My Computer option,transcend 1TB external hard drive(StoreJet 25A3) is not getting detected in my computer disk management is showing it is fully empty,Transcend 1 TB Store jet external hard disk,Transcend hard drive not detected mac,transcend external hard drive 1tb not detected,transcend 250gb hard disk led is not blinking,why my Transcend external HDD is not getting powered,Transcend External HDD Not Detected in My Computer,Transcend / 1TB / undetected external hard drive,transcend external hard drive not detected windows 10,transcend external hard drive not detected mac,transcend external hard drive no power,transcend hard drive light not blinking,transcend hard drive

Comments

User5150

500 GB Titanium II External USB 2.0 Hard Disk Drive uses the same enclosure as this AcomData E5 HybridDrive. The Fantom drive has a standard SATA-to-USB interface without the fancy CD PART and HD PART partition. If you just want a 500 GB hard disk without the password security, the Fantom drive is the way to go. See my review in the "Related Links" section below. Update!The answer is YES! You can use other hard drives in this enclosure.Based on ccl's comment in the discussion thread, you can download the converters to convert the drive between a Secure CD+HDD and the regular HDD. The two utilities are the following:For Windows:xSil251 Switch HDD to CD+HDD_Nomad Mobile Desktop_V1.04_091007xSil251 Switch CD+HDD to HDD 3.5_Toshiba_V1.02_041307For Macintosh:Switch to CD+Secure Nomad for MacCD to HDD Convertor for MacThe first utility shown above converts it to the SecureDrive. The second utility converts the enclosure to a regular HDD. The conversion is done by firmware re-flash of the on-board USB controller. The conversion reformats the hard disk and will cause all your data to be lost. Comments & Discussion >> Does the 500 GB Drive Work Without the Case?Next, I decided to see if the 500 GB FAT32 drive shows up in Windows Explorer when connected via another SATA/USB interface. I used the "Sabrent USB 2.0 to IDE/SATA Cable" to connect the 500 GB SATA drive to my computer. No drive showed up. Looking at the partition, I see an unknown partition. Apparently AcomData used a proprietary partition to hold the virtual CD partition (CD PART) and the FAT32 partition (HD PART).I know I can repartition the drive, but that means the drive will not work inside this USB enclosure ever again. So that's not an option. UpdateAfter performing the SecureDrive to regular HDD conversion mentioned in the prior section, you will be able to use the hard drive in another enclosure. Comments & Discussion >> Related Links AcomData 500 Gb External Hybrid USB2 - Amazon User Reviews AcomData E5 HybridDrive Full-Color Product Sheet AcomData Hard Drive Enclosure for 3.5" IDE Hard Drives User's Guide E5 External Hard Drives FAQs Fantom Drives 500 GB Titanium II External USB 2.0 Hard Disk Drive HybridDrive User's Guide Is your data really protected by USB device passwords? problem with acomdata external hard drive PushButton Backup User�s Guide Sabrent USB 2.0 to IDESATA Cable for 2.5-Inch 3.5-Inch 5.25-Inch Drive with Power Adapter USB-DSC5 - TigerDirect User Reviews Attach | Edit | Revisions Related ContentAttachmentsHard Drive Slides Out From the Front.JPG (45 KB)Peal Off the Back Plate.JPG (39 KB)Unknown Partition.png (17 KB)Unscrew Two Bottom Screws.JPG (32 KB)Unscrew the Circuit Board.JPG (48 KB)Unscrew the Hard Drive from the Bottom.JPG (38 KB)Warranty Void If Seal Is Broken.JPG (24 KB)

2025-04-16
User4821

IBook G4, but not in 480mbit mode. Other similar devices like the 1TB Seagate Freeagent work in hi-speed mode on my USB 2.0 ports and hub, but I don't have another machine with USB 2.0 to test the Acomdata on. I'm using Mac OS X 10.5.6. #6 I have that same "hi-speed" USB 2.0 Acomdata 320GB external hard disk, and I can't get it to operate above 12mbit/s on my iBook G4 either. It won't connect to my hi-speed USB 2.0 powered hub at all. It will work when plugged directly into my iBook G4, but not in 480mbit mode. Other similar devices like the 1TB Seagate Freeagent work in hi-speed mode on my USB 2.0 ports and hub, but I don't have another machine with USB 2.0 to test the Acomdata on. I'm using Mac OS X 10.5.6. Try completely erasing the drive and re-format it using Disk Utility. Format it to DOS (FAT-32). That's a long shot but it may work. I suspect those particular AcomData drives have defective firmware and\or drive electronics and probably should have been recalled or returned. Not much you can about that....Another thing you might try: Remove the drive from its case and place it in an external USB 2.0 case. That has a better chance of working.Regards. Shop for your Apple, Mac, iPhone and other computer products on Amazon. We are a participant in the Amazon Services LLC Associates Program, an affiliate program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.

2025-04-05
User6606

#1 I have an AcomData 320GB external drive that's supposed to operate at USB 2.0 speeds. However, it's registering as a USB 1.1 device, and so it's operating at USB 1.1 speeds, which is unacceptable for what I'm trying to use it for.I believe the problem is the special "CD" partition that the drive contains. It is "unformatable," supposedly, and mounts before the FAT32 other partitions on the drive. I think this forces it into USB 1.1 mode.Anyone have any suggestions or ideas? Or experience with these drives?The problem exists in windows, too, and on other computers, by the way. #2 Dumb question, but is it plugged into a USB 2 port? Do all the new Macs have USB 2 only? #3 Since he is using a Macbook there would be nothing but USB 2.0 ports. Is the drive plugged straight into the Macbook or through a hub? You are the 2nd person here to have issues with that very drive running at 1.1. Does the drive have Firewire also or just USB? #4 I'm plugged directly into the Macbook's USB 2.0 ports. Unfortunately, the drive is only USB, so firewire, of course, is not a current option.Any suggestions about getting rid of that other "unformattable" partition so the drive can just be a normal USB 2.0 drive?AcomData hasn't responded to my e-mails and such and it's been nearly 4 months or so. Probably the worst company I have ever dealt with - I strongly recommend that no one buy anything from them. #5 I have that same "hi-speed" USB 2.0 Acomdata 320GB external hard disk, and I can't get it to operate above 12mbit/s on my iBook G4 either. It won't connect to my hi-speed USB 2.0 powered hub at all. It will work when plugged directly into my

2025-04-20
User8946

07-16-2004, 12:11 AM Member Join Date: Jul 2003 Location: Fairfax, California Posts: 1,125 Acomdata Hard Drives Hey guys,Been out on a little road trip for the past week or so, and came back to find that a client of mine bought a 80 GB Firewire hard drive from Acomdata ( I was reading through the Spec Sheet of it trying to find mention of the Oxford 911 chipset, but I've also seen the IEEE 1394 being mentioned alongside Oxford 911 chipsets...do IEEE 1394 and Oxford 911 mean the same thing? Will this thing work for Pro Tools?Sorry to ask here, I should have researched but I have to start a session tomorrow and I thought for sure someone here could provide me with a quick answer. Thanks for baring with me...Ev __________________ ik zei nooit dat! 07-16-2004, 04:31 AM Member Join Date: Apr 2004 Location: Australia Posts: 485 Re: Acomdata Hard Drives Give it a go, then post back here with the results. 07-16-2004, 08:18 AM Member Join Date: Oct 2003 Location: Toronto, Canada Posts: 10,894 Re: Acomdata Hard Drives nightshadecrisis ,IEE1394 is the patent/standard for all "fire wire" communication protocols.The "Oxford 911" is one of the ( and the only Digi approved ) hardware bridge chipset, that is inside the drive enclosure.So, if it says both...you're good to go.happy tooling,cheers, __________________ cheers,AndrewW7 pro 64_i7 3930K_16GB_ Nuendo 6.5.4-7.1.3 / PT 12.4 ------Mac Mini OSX Lion_PT 10.xxAllen&Heath GS R-24M_ full rack of vintage analog boxes _UAD2_Nugen_iZotope_Melda_Waves_Plugin Alliance_DMG and more2.0 and 5.1 monitoring 07-16-2004, 09:35 AM Re: Acomdata Hard Drives Acom drives do NOT have the Oxford 911 bridge chip - better take it back and get one that does. Oxford 911 is a type of chip that translates data between the firewire connection protocol and the IDE/ATA protocol of the drive. It is made by Oxford Semiconductor, hence the name. IEEE 1394 is the specification for Firewire. IEEE stands for Institute of Electrical and Electronics Engineers. Firewire is just the generic name for that particular spec. 07-16-2004, 09:48 AM Member Join Date: Jul 2003 Location: Fairfax, California Posts: 1,125 Re: Acomdata Hard Drives thanks a lot, I'll take it back and grab another drive.I've seen these work fine on Macs, but since I'm going to be going back and forth between Mac TDM and PC PTLE, I dont wanna make a $150 mistake...muchas gracias,evan __________________ ik zei nooit dat! 07-17-2004, 11:01

2025-04-12
User8071

Attach | Edit | Revisions Related ContentRecently I bought a AcomData 500 GB Hybrid Drive to store my photos and videos. But this external drive act so weird with its password protection and virtual CD auto-mount, etc. (see my review), that I just have to take it apart and see what it's about.Before disassembling your own HybridDrive, note that you will void the warranty sticker that is on the bottom of the drive (see photo below). After you've gotten over the warranty issue, use an X-acto knife to slice through the warranty stick along the aluminum/plastic seam. You'll need to make two cuts, one for each seam.When you are done with the sticker, carefully peal off the aluminum back (see photo below). Be careful, because the aluminum back panel is a very thin piece of cover. If you don't want to keep it, then you can be as rough as you like. But I think the back aluminum cover looks cool and makes the external drive look whole. Pealing off the aluminum cover, you'll uncover four screws. Unscrew these screws and remove the black plastic cover. Then locate the two small screws under the drive case (see photo below). If you have the vertical stand attached, you'll have to remove it first to find the two small screws. Be careful while unscrew these small screws as the internal components will slide out from the front when you are done. The photo below shows the internal components. The hard drive inside is a Western Digital WD5000AAKS Caviar SE16. It is connected via the 16-bit USB control via SATA.To remove the hard drive, you'll have to unscrew the circuit board first. There are three small screws fastening the circuit board to the metal bracket. Two of the small screws are shown in the photo below. After removing the three small screws for the circuit board, turn the metal bracket over. You'll need to unscrew the four screw shown in the photo below. After removing the screws, the hard drive can be detached from the USB circuit board and removed from the bracket. Comments & Discussion >> Is Hard Drive Replaceable?The question is whether it's possible to replace the drive inside the case with another SATA drive. We might want to do this when the 500 GB drive eventually fails. Or maybe we simply want to use the 500 GB drive somewhere else and swap a different SATA drive into this case.I happen to have a Maxtor DiamondMax 10 6L300S0 300 GB SATA150 HDD that I could use for this test. I plugged this drive into the AcomData enclosure, powered it on, and then plugged it into the computer. An empty CD-ROM drive showed up in my computer, but that was it. No other partition was shown. I couldn't get it to repartition or anything else.The 300 GB drive is formated with NTFS. In the future, I may reformat it into FAT32 to try again. Tip I've recently found that the Fantom Drives

2025-04-18

Add Comment