Download usb auto copy

BIOS Update Executable for Windows/DOSDownload1. Click Download File to download the file.2. When the File Download window appears, click Save to save the file to your hard drive.Run the BIOS update utility from Windows environment1. Browse to the location where you downloaded the file and double-click the new file.2. Windows System will auto restart and update BIOS while system startup screen.3. After BIOS update finished, system will auto reboot to take effect.Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)1. Copy the downloaded file to a bootable DOS USB key.2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.3. Run the file by typing copied file name where the executable is located. 4. DOS System will auto restart and update BIOS while system startup screen. 5. After BIOS update finished, system will auto reboot to take effect.Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)1. Copy the downloaded file to a bootable DOS USB key.2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".3. Change "UEFI" to "Legacy" of Boot List Option.4. Click "Apply","Exit" to save changes and reboot system.5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.6. Run the file by typing copied file name where the executable is located. 7. DOS system will auto restart and update BIOS while system startup screen.8. After BIOS update finished, system will auto reboot.9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".10. Change "Legacy" to "UEFI" Boot Option.11. Go to "Exit > Exit Save Changes" and reboot system.--------------------------------------------------------------------------------Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.

BIOS Update Executable for Windows/DOSDownload1. Click Download File, to download the file.2. When the File Download window appears, click Save to save the file to your hard drive.Run the BIOS update utility from Windows environment1. Browse to the location where you downloaded the file and double-click the new file.2. After BIOS update finished, system will auto reboot to take effect.Run the BIOS update utility from DOS environment (Non-Windows users)1. Copy the downloaded file to a bootable DOS USB key.2. Power on the system, then Press F12 key and Select ""USB Storage Device"" and Boot to DOS prompt.3. Run the file by typing copied file name where the executable is located.4. After BIOS update finished, system will auto reboot to take effect.--------------------------------------------------------------------------------Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.

Installer for USB sticks There are two types of installers available to run Total Commander from an USB stick: 1. Installer for normal USB sticks and PortableApps This little tool allows you to copy an existing installation of Total Commander including all plugins and settings files to an USB stick. This is useful if you want to take Total Commander with you to work on various machines, e.g. for support work. It will automatically detect an existing PortableApps installation on the stick, and add Total Commander to it. The tool will NOT copy programs to the stick to which you link on the button bar. Supports 32-bit, 64-bit and combined 32+64-bit versions, depending on what is installed on your harddisk! Download tc2usb tool (34k) 2. Installer for special U3 sticks (your stick has the U3 logo): U3 USB sticks are special devices which show a menu icon in the system tray when inserted, and also support auto-run of programs from USB sticks. They require a special installer package which will work with the U3 installer. Optionally, all plugins and settings of an installed desktop version can be copied to the U3 stick too. Please only download this package if you really have an U3 stick! Download U3 install package (Version 11.51, 32-bit, 6.1 MB) After the download, you can install the package via "Install programs" - "Install from My Computer" from the U3 menu, then choose the just downloaded totalcmd.u3p file.