1 sec click
Author: m | 2025-04-24
Jitter Click Test. 10. CPS 0. Clicks 0. Click To Start Test. 1 Sec Sec 15 Sec. Sec 60 Sec. 100 Sec. CHECK YOUR SCORE. Your CPS is. 0.50 CPS 1
Does scroll clicking count as hacking? (21 clicks a sec)
Challenge your reflexes and dexterity with our definitive Click Speed Test. How fast can you click? Join the ranks of elite clickers and set your personal best! 1 sec 5 sec 10 sec 15 sec 20 sec 30 sec Test time seconds Clicks Clicks per second cps Clicks per minute cpm Click the + button to start: Using the CPS Test:Choose a test duration in seconds or select a preset option.Rapidly hit the + button or spacebar until the timer runs out.Check your results for clicks per second (CPS) and clicks per minute (CPM).Hit the × button to start over. How many clicks is 1 cps?The click-per-second challenge starts similarly to other modes, such as clicks in 5, 10, or 60 seconds. However, in the 1-second version, players must act quickly and continuously click without pausing. Typically, most participants achieve a rate of 8-10 clicks per second. See also Bar Graph MakerClick CounterCPS TestLine Graph MakerNotepad HelpOnline CameraOnline NotepadPie Chart MakerRuler cm/mm online, actual sizeRuler inchesScatter Plot MakerScoreboardTable Chart MakerToday's DateTone generatorWebcam mirror online
Clicks in 20 Seconds - Click Challenge Game 20 Sec
Anyone that was involved be involved with my accounts in any capacity? + Regulation Violations - Other Regulatory Agencies No SEC ADV Part 1 | Item 11.D.25.22% of firms report this disciplinary action (SEC data, Jan. 2024)What does this mean?A federal regulatory agency, a state regulatory agency, or a foreign financial regulatory authority other than the SEC or CFTC has found firm or an advisory affiliate to have been involved in a violation of investment-related statutes or regulations.Questions to askWhat happened? When? How many times did it occur? Will anyone that was involved be involved with my accounts in any capacity? + Regulation Violations - Court No SEC ADV Part 1 | Item 11.H.1.B0.31% of firms report this disciplinary action (SEC data, Jan. 2024)What does this mean?A domestic or foreign court has previously found firm or an advisory affiliate was involved in a violation of investment-related statutes or regulations.Questions to askWhat happened? When? How many times did it occur? Will anyone that was involved be involved with my accounts in any capacity? + Registration/License Revocation - Other Regulatory Agencies No SEC ADV Part 1 | Item 11.D.51.68% of firms report this disciplinary action (SEC data, Jan. 2024)What does this mean?A regulatory agency has previously denied, suspended, or revoked the firm’s or an advisory affiliate’s registration or license or otherwise restricted their activities.Questions to askWhat happened? When? How many times did it occur? Will anyone that was involved be involved with my accounts in any capacity? Conflict alerts report_problem Alerts identified (1) Our system has identified the following conflict alerts. Click on the + to learn more about each item. Disclosure + 12b-1 Conflict Ask Firm* SEC ADV Part 2What does this mean and why is this important?Firm offers mutual funds that carry 12b-1 fees, which increases the total annual costDexter Clicks in 10 Seconds - Click test in 10 sec
INSANITY MAX:30 ABS MAXIMIZER WORKOUT CALENDAR time-to-engage.com / fb: coachgregarmfield M ONT H 1 M ON DAY T U E SDAY W EDNES DAY THURS DAY FRI DAY S ATUR DAY S UNDAY CARDI0 TABATA SWEAT TABATA FRIDAY PULSE REST CHALLENGE POWER INTERVALS* POWER FIGHT: WEEK ROUND 1 Take your “Day 1” 1 pics & stats MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. CARDIO TABATA SWEAT TABATA FRIDAY PULSE CHALLENGE POWER INTERVALS* POWER FIGHT: WEEK ROUND 1 AB ATTACK:10 AB ATTACK:10 AB ATTACK:10 2 MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. CARDI0 TABATA SWEAT TABATA FRIDAY PULSE CHALLENGE STRENGTH INTERVALS* STRENGTH FIGHT: WEEK ROUND 1 MAX OUT ABS** 360º ABS** AB ATTACK:10 3 MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. *If you have the Sweat Fest DVD, you can use it in place of SWEAT INTERVALS anywhere it appears on this calendar. sec. MAX OUT: min. REST sec. CARDI0 TABATA SWEAT TABATA FRIDAY PULSE CHALLENGE STRENGTH INTERVALS* STRENGTH FIGHT: WEEK ROUND 1 360º ABS** MAX OUT ABS** AB ATTACK:10 4 REST sec. REST Take your “Day 30” pics & stats INSANITY MAX:30 ABS MAXIMIZER WORKOUT CALENDAR time-to-engage.com / fb: coachgregarmfield M ONT H 2 M ON DAY T U E SDAY W EDNES DAY THURS DAY FRI DAY S ATUR DAY MAX OUT MAX OUT MAX OUT MAX OUT FRIDAY PULSE CARDIO POWER SWEAT STRENGTH FIGHT: WEEK ROUND 2 1 MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. REST sec. MAX OUT MAX OUT MAX OUT MAX OUT FRIDAY PULSE CARDIO POWER SWEAT STRENGTH FIGHT: WEEK ROUND 2 MAX OUT ABS** 360º ABS** AB ATTACK:10 3 REST sec. MAX OUT MAX OUT MAX OUT MAX OUT FRIDAY PULSE CARDIO POWER SWEAT STRENGTH FIGHT: WEEK ROUND 2 AB ATTACK:10 AB ATTACK:10 AB ATTACK:10 2 S UNDAY REST sec. MAX OUT MAX OUT MAX OUT MAX OUT FRIDAY CARDIO CHALLENGE CARDIO POWER SWEAT STRENGTH FIGHT: CHALLENGE COMPLETE! WEEK ROUND 2 Take your “Day 60” pics & stats 360º ABS** MAX OUT ABS** 4 MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. MAX OUT: min. sec. *If you have the Sweat Fest DVD, you can use it in place of SWEAT. Jitter Click Test. 10. CPS 0. Clicks 0. Click To Start Test. 1 Sec Sec 15 Sec. Sec 60 Sec. 100 Sec. CHECK YOUR SCORE. Your CPS is. 0.50 CPS 1 Kohi Click Test. 10. CPS 0. Clicks 0. Click To Start Test. 1 Sec Sec 15 Sec. Sec 60 Sec. 100 Sec. CHECK YOUR SCORE. Your CPS is. 0.50 CPS 11 Sec Spacebar Test - Space Bar Clicker - Online Click Test
AdvisorSearch.org is committed to the highest ethical standards and reviews services independently. Learn How We Make Money HS Management Partners, registered in 2007, serves 16 state(s) with a licensed staff of 1 advisors. HS Management Partners manages $1.5 billion and provides investment advisory services for 140 clients (1:140 advisor/client ratio). Overall info 5.0 Firm information Summary Average Client Balance $11.1 million Assets Under Management $1.5 billion Advisor/Client Ratio 1:140 Website Visit Site Main Office Address 640 Fifth Avenue, 18th Floor. New York, NY 10019 Registration Jurisdiction SEC Form CRS (Client Relationship Summary) View Filing SEC Filings View Filings verified_user Trust AlgorithmOur searchable database of U.S.-based financial advisors includes more than 17,000 firms across the country. Each month, AdvisorSearch.org downloads the latest regulatory data from the SEC IAPD database. This data is then run through our proprietary Trust Algorithm to generate a star rating for each firm based on a variety of measures, including disciplinary history and conflicts of interest.As a Certified B Corporation™, our focus is simple: people before profits. Each month, AdvisorSearch.org serves as a trusted resource to help thousands of Americans research and compare financial advisors.Disciplinary alerts check_circle No alerts identified Our system found no disciplinary alerts. Checks take place monthly. Click on the + to learn more about each item. Disclosure + Activity Restriction - SRO No SEC ADV Part 1 | Item 11.E.42.13% of firms report this disciplinary action (SEC data, Jan. 2024)What does this mean?Firm or one of its employees previously has been subject to a suspension or expulsion or other restriction of activities by a Self-Regulating Organization or commodities exchange.Questions to askWhat happened? When? How many times did it occur? Will anyone that was involved be involved with my accounts in any capacity? + Attorney/Accountant Authorization Revocation No SEC ADV Part 1 | Item1 Sec Spacebar Test - Space Bar Clicker - Best Click Test
If you have the Symbolic toolbox, then you can download the MATLAB install it with the symbolic toolbox. If you already have MATLAB installed, then you can click you can click Add-ons and search for the symbolic toolbox and install it. % Ensure the Symbolic Math Toolbox is availablesyms v(t)% Define the ODEode = diff(v, t) == -0.5*v + sec(t) + tan(v);% Specify initial conditioncond = v(0) == 0;% Solve the ODEsol = dsolve(ode, cond);% Display the solutiondisp('The exact solution is:');disp(sol);% Ensure the Symbolic Math Toolbox is availablesyms v(t)% Define the ODEode = diff(v, t) == -0.5*v + sec(t) + tan(v);% Specify initial conditioncond = v(0) == 0;% Solve the ODEsol = dsolve(ode, cond);% Display the solutiondisp('The exact solution is:');disp(sol);% Optionally, convert the solution to a function for further usev_exact = matlabFunction(sol); ode = diff(v, t) == -0.5*v + sec(t) + tan(v);sol = dsolve(ode, cond);Warning: Unable to find symbolic solution.disp('The exact solution is:');v_exact = matlabFunction(sol); ode = diff(v, t) == -0.5*v + sec(t) + tan(v);sol = dsolve(ode, cond);Warning: Unable to find symbolic solution.disp('The exact solution is:');ode = diff(v, t) == -0.5*v + sec(t) + tan(v);sol = dsolve(ode, cond);Warning: Unable to find symbolic solution.disp('The exact solution is:');v_exact = matlabFunction(sol) % Clear workspace and command windowclear; clc;T==2; %Final time% Define symbolic variablessyms v(t) % Define the ODEode = diff(v, t) == -0.5*v + sec(t) + tan(v) - (exp(-t) + v + int(v^2, t, 0, t));% Specify the boundary conditioncond = v(0) == 0;cond = v(T) == 1;% Solve the ODEsol = dsolve(ode, cond);% Display the exact solutiondisp('The exact solution is:');disp(sol);New CPS Tester 1 Sec to 100 Download - Clicking Speed Test
On “View” and ensure “Device Information” is checked. In the left-hand “Device Information” pane, make note of your “Sector size”. For me it is 512 bytes. That’s it for the GUI. You may close gparted.From the command-line, run the following:# ensure the partition is unmounted (use Tab to autocomplete once you start# typing this)sudo umount /media/your_name/your_disk# Ensure your dependencies are installed. # See: apt update sudo apt install exfat-fuse exfat-utils # for Ubuntu 20.04 and earliersudo apt install exfat-fuse exfatprogs # for Ubuntu 22.04 and later# Now, format your partition to exFAT# - WARNING: BE SURE TO UPDATE `/dev/sda999` TO WHATEVER IT SHOULD BE FOR YOU IN# THE COMMANDS BELOW, so you format the correct disk. # - Choose the correct command for your desired cluster size. # - You can use any power-of-2 number in the `-s num` option, thereby choosing a# custom cluster size if desired.# NB: **creation** speed goes way faster for larger clusters too! The times# below in parenthesis are for creating an exFAT file system of these cluster# sizes on a 500 GB Western Digital Blue (rated 3500 MB/sec) SSD.## Also, when using a file manager to right click and create a new folder, there# was a very noticeable lag when I did it with a cluster size of 0.5 KiB. ## Set the name after `-n` to whatever you want too. `-s` specifies how many# sectors to use per cluster. Assuming you have 512 byte sectors, the following# cluster size comments are accurate.## cluster size (format time)# ---------- -------------time sudo mkexfatfs -n "my_exFAT" -s 1 /dev/sda999 # 0.5 KiB (512 byte) # clusters (10 sec)time sudo mkexfatfs -n "my_exFAT" -s 8 /dev/sda999 # 4 KiB clusters (1.340 sec)time sudo mkexfatfs -n "my_exFAT" -s 16 /dev/sda999 # 8 KiB clusters (0.698 sec) time sudo mkexfatfs -n "my_exFAT" -s 64 /dev/sda999 # 32 KiB clusters (0.230 sec)time sudo mkexfatfs -n "my_exFAT" -s 256 /dev/sda999 # 128 KiB clusters (0.075 sec)time sudo mkexfatfs -n "my_exFAT" -s 65536 /dev/sda999 # 32 MiB clusters (0.120 sec) [absolute max cluster size allowed!]Checking your cluster size on any already-formatted filesystemNow mount the drive via your file manager GUI. Ensure gparted is closed for this to work. Then, click the disk and it will auto-mount.Check your cluster size per my instructions here: How to find the cluster size of any filesystem, whether NTFS, Apple APFS, ext4, ext3, FAT, exFAT, etc.:cd /media/your_name/your_disk# Check cluster size by making and checking a 2-byte (1 char + null terminator I# think) file. echo "1" > test.txt# This is how many bytes this file actually *takes up* on this disk!du -h test.txt# Check file size. This is the number of bytes in the file itself.ls -alh test.txt | awk '{print $5}'Test data: how did I perform the tests to make the plots above?Note: Gnome Disks tested my disk and showed it to have the following performance. I ran the test various times when the exFAT partition was formatted with different cluster sizes, and it seems to makeDoes scroll clicking count as hacking? (21 clicks a sec)
SX110 IS has approx. 688% higher pixel density than Samsung GX-20. To learn about the accuracy of these numbers, click here. Specs Effective megapixels 14.60 9.00 ISO sensitivity Auto, 100, 200, 400, 800, 1600, 3200 Auto, 80 ,100, 200, 400, 800, 1600 Focal length (35mm equiv.) 36 - 360 mm Aperture priority Yes Yes Max. aperture f2.8 - f4.3 Max. aperture (35mm equiv.) n/a f15.7 - f24.2 Metering Centre weighted, Matrix, Spot Multi, Center-weighted, Spot Exposure compensation ±2 EV (in 1/3 EV steps) ±2 EV (in 1/3 EV steps) Min. shutter speed 30 sec 15 sec Max. shutter speed 1/4000 sec 1/2500 sec Viewfinder Optical (pentaprism) None White balance presets 8 6 Screen resolution 230,000 dots 230,000 dots Storage types SDHC, Secure Digital SD/SDHC/MMC card USB USB 2.0 (480 Mbit/sec) USB 2.0 (480 Mbit/sec) Battery Lithium-Ion rechargeable (SLB-1137D) AA (2) batteries (NiMH recommended) Dimensions 142 x 101 x 72 mm 111 x 71 x 45 mm Choose cameras to compare Popular comparisons: Samsung GX-20 vs. Pentax K20DSamsung GX-20 vs. Pentax K-rSamsung GX-20 vs. Samsung NX10Samsung GX-20 vs. Pentax K-7Samsung GX-20 vs. Samsung GX-10Samsung GX-20 vs. Canon PowerShot SX50 HSSamsung GX-20 vs. Nikon D3100Samsung GX-20 vs. Canon EOS 650DSamsung GX-20 vs. Canon EOS 500DSamsung GX-20 vs. Canon EOS 600DSamsung GX-20 vs. Canon EOS 450D Diagonal Diagonal is calculated by the use of Pythagorean theorem: where w = sensor width and h = sensor height Samsung GX-20 diagonal w = 23.40 mm h = 15.60 mm Diagonal = √ 23.40² + 15.60² = 28.12 mm Canon SX110 IS diagonal The diagonal of SX110 IS sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes. w = 6.16 mm h = 4.62 mm Diagonal = √ 6.16² + 4.62² = 7.70 mm Surface area Surface area is calculated by multiplying the width and the height of a sensor. GX-20 sensor area Width = 23.40 mm Height = 15.60 mm Surface area = 23.40 × 15.60 = 365.04 mm² SX110 IS sensor area. Jitter Click Test. 10. CPS 0. Clicks 0. Click To Start Test. 1 Sec Sec 15 Sec. Sec 60 Sec. 100 Sec. CHECK YOUR SCORE. Your CPS is. 0.50 CPS 1 Kohi Click Test. 10. CPS 0. Clicks 0. Click To Start Test. 1 Sec Sec 15 Sec. Sec 60 Sec. 100 Sec. CHECK YOUR SCORE. Your CPS is. 0.50 CPS 1
Clicks in 20 Seconds - Click Challenge Game 20 Sec
6dB, 9dB, 12dB, 24dBShutter Speed (Preset): 60i/60p mode: 1/60 (OFF) sec., 1/100 sec., 1/120 sec., 1/250 sec., 1/500 sec., 1/1000 sec., 1/2000 sec. 30p mode: 1/30 (OFF) sec., 1/60 sec., 1/100 sec., 1/120 sec., 1/250 sec., 1/500 sec., 1/1000 sec., 1/2000 sec. 24p mode: 1/24 (OFF) sec., 1/60 sec., 1/100 sec., 1/120 sec., 1/250 sec., 1/500 sec., 1/1000 sec., 1/2000 sec.Shutter Speed (Variable):60i mode: 1/60.0 sec. to 1/249.8 sec. 30p mode: 1/30.0 sec. to 1/249.8 sec. 24p/24pA mode: 1/24.0 sec. to 1/249.8 sec.Shutter Speed (Slow): 60i/60p mode: 1/15 sec., 1/30 sec. 30p mode: 1/7.5 sec., 1/15 sec. 24p/24pA mode: 1/6 sec., 1/12 sec.Aperture Angle: 3 deg to 359.5 deg, 0.5 deg step selectVariable Frame Rate : 12/15/18/20/21/22/24/25/26/27/28/30/32/34/36/40/44/48/54/60fps (frame/sec)Horizontal Resolution: More than 1000 TV lines (Center)Minimum Luminance: 0.8 lx (F1.6 , Gain 24dB , Shutter Speed 1/30 sec.)Memory Card RecorderRecording Media: P2 CardRecording Format: AVC-Intra 100/AVC-Intra 50/DVCPRO HD/DVCPRO50/ DVCPRO/DV selectableRecording Video Signal:1080/59.94i, 1080/29.97p, 1080/29.97pN, 1080/23.98p, 1080/23.98pA, 1080/23.98pN, 720/59.94p, 720/29.97p, 720/29.97pN, 720/23.98p, 720/23.98pN, 480/59.94i, 480/29.97p, 480/23.98p, 480/23.98pARecording Time*: AVC-Intra 100/DVCPRO HD Approx. 16 min. with a 16GB P2 card Approx. 32 min. with a 32GB P2 card Approx. 64 min. with a 64GB P2 cardAVC-Intra 50/DVCPRO50 Approx. 32 min. with a 16GB P2 card Approx. 64 min. with a 32GB P2 card Approx. 128 min. with a 64GB P2 cardDVCPRO/DV Approx. 64 min. with a 16GB P2 card Approx. 128 min. with a 32GB P2 card Approx. 256 min. with a 64GB P2 card* Time shown above is when you record aDexter Clicks in 10 Seconds - Click test in 10 sec
Readies Searing Palm on hit.Searing Palm45+53mTargetInstant30 sec.On Leading Palm / Searing Dragon use; On Avenging Fist / Hellfire Kick hit; Upon Resist by Shadow Dance / Footwork4 ~ 20%[10] damage. Pierces Defense and Parry skills. -10% Speed. For 12 sec.: +1 Focus/sec; +20% Damage Reduction. Applies Searing Palm to target; gain +2.5% Critical Damage for 3 sec. on hit (max 10 stacks).Flurry23016mTargetInstant24 sec.NoneNoInflicts [18] damage over 4 hits. Approaches enemy. Resists damage and status effects. On Resist, decreases cooldown of: Searing Palm by 8 sec. (max 1 time); Tremor Tremor by 6 sec. (max 1 time).Tremor3601m5m radiusInstant45 sec.None3 ~ 15%[25] damage for 10 sec. on enemies within range. Recovers 2 Focus for each enemy hit. Triggers Volcano effect for 6 sec. and Raging Volcano effect for 3 sec. Pierces Defense and Parry skills.Shadow Dance80Centered on CasterTarget0.2 sec.15 sec.NoneNoDashes to the left. Resists damage and status effects: for 0.6 sec; up to 5 times for 1 sec. +35% Movement Speed for 6 sec. On Resist: Recovers 5 Focus; Recovers 2% of HP over 2 sec.; Triggers Volcano and Raging Volcano effects for 3 sec.Footwork80Centered on CasterTarget0.2 sec.15 sec.NoneNoDashes to the right / Moves forward 5m untargeted. Resists damage and status effects: for 0.6 sec; up to 5 times for 1 sec. +35% Movement Speed for 6 sec. On Resist: Recovers 5 Focus; Recovers 2% of HP over 2 sec.; Triggers Volcano and Raging Volcano effects for 3 sec.Backstep250Centered on CasterTargetInstant8 sec.NoneMoves backward 8m. Resist for 1.5 sec. +50% Speed for 4 sec. On Resist: Volcano and Raging Volcano for 3 sec.; decrease Searing Palm cooldown by 5 sec.Eight Talons55016m5m radius0.3 sec.InstantMax Hongmoon Focus5 ~ 25%[220] damage over 5 time(s). Approaches enemy. Pierces Defense and Parry skills. Resists dmage and status effects up to 3 times.Aftershock55016m5m radius0.3 sec.InstantMax Hongmoon Focus5 NoLaunches target Airborne. [10] damage over 5 time(s). Approaches enemy. Pierces Defense and Parry skills. +35% Speed for 5 sec. after using. -50% Speed for 6 sec. Recovers 5% Hongmoon Focus per enemy hit.NO HOTKEYCrimson Dragon550----NoneNoEnables Burning Fist during Volcano. Evasion +100%. Evasion +5,000 for 2 Evasions. Speed +30% during Raging Volcano. On Resist: 35% Damage Reduction for 5 sec.; Volcano for 5 sec.; reset Flurry cooldown.Unleashed600----NoneNoTriggers Unleashed effect for 12 sec. when using Searing Palm: Boss Attack Power +200, Critical Damage +10%.SkillLevelFocusRangeAreaCast TimeCooldownSkill RequirementsEnhanceableStraight Jab2+13mTargetInstantInstantNoneNoInflicts [1.3] damage. Recovers +1 Focus on crit.Iron Shoulder4+4Centered on Caster2 x 5mInstant6 sec.During Wind Shear2 ~ 10%Inflicts [7.8] damage. Pierces Defense and Parry. Resets Cyclone Kick.Swooping Crane5+16 ~ 16mTargetInstant6 sec. While WindwalkingNoKnocks down for 2 sec. Inflicts [1] damage. Approaches enemy.War Cry180Centered on CasterTargetInstant30 sec.NoneNo+250% Threat for 3 min.Tiger's Pounce28+15 ~ 16mTargetInstant6 sec.After BackstepNoKnockdown for 2 sec. Inflict [1] damage. Approach enemy. Pierces Parry. Ignore Block. Jitter Click Test. 10. CPS 0. Clicks 0. Click To Start Test. 1 Sec Sec 15 Sec. Sec 60 Sec. 100 Sec. CHECK YOUR SCORE. Your CPS is. 0.50 CPS 1 Kohi Click Test. 10. CPS 0. Clicks 0. Click To Start Test. 1 Sec Sec 15 Sec. Sec 60 Sec. 100 Sec. CHECK YOUR SCORE. Your CPS is. 0.50 CPS 11 Sec Spacebar Test - Space Bar Clicker - Online Click Test
#1 I ran `iperf3` between two Windows machines and noticed that the speeds were not symmetric. I tested using both the built-in 1-gigabit Ethernet adapters in each machine as well as with 10-gigabit Mellanox ConnectX-2 cards in both machines.Here's the relevant output. I address the 10-gigabit cards using IP addresses of `192.168.1.XXX` while I address the 1-gigabit adapters with `192.168.0.XXX`. Code: PS E:\myfolder> iperf3.exe -c 192.168.1.220Connecting to host 192.168.1.220, port 5201[ 4] local 192.168.1.201 port 54596 connected to 192.168.1.220 port 5201[ ID] Interval Transfer Bandwidth[ 4] 0.00-1.00 sec 914 MBytes 7.66 Gbits/sec[ 4] 1.00-2.00 sec 909 MBytes 7.63 Gbits/sec[ 4] 2.00-3.00 sec 938 MBytes 7.87 Gbits/sec[ 4] 3.00-4.00 sec 959 MBytes 8.05 Gbits/sec[ 4] 4.00-5.00 sec 956 MBytes 8.02 Gbits/sec[ 4] 5.00-6.00 sec 958 MBytes 8.04 Gbits/sec[ 4] 6.00-7.00 sec 974 MBytes 8.17 Gbits/sec[ 4] 7.00-8.00 sec 995 MBytes 8.34 Gbits/sec[ 4] 8.00-9.00 sec 960 MBytes 8.05 Gbits/sec[ 4] 9.00-10.00 sec 971 MBytes 8.15 Gbits/sec- - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval Transfer Bandwidth[ 4] 0.00-10.00 sec 9.31 GBytes 8.00 Gbits/sec sender[ 4] 0.00-10.00 sec 9.31 GBytes 8.00 Gbits/sec receiveriperf Done.PS E:\myfolder> iperf3.exe -s-----------------------------------------------------------Server listening on 5201-----------------------------------------------------------Accepted connection from 192.168.1.220, port 49675[ 5] local 192.168.1.201 port 5201 connected to 192.168.1.220 port 49676[ ID] Interval Transfer Bandwidth[ 5] 0.00-1.00 sec 428 MBytes 3.59 Gbits/sec[ 5] 1.00-2.00 sec 371 MBytes 3.11 Gbits/sec[ 5] 2.00-3.00 sec 406 MBytes 3.40 Gbits/sec[ 5] 3.00-4.00 sec 423 MBytes 3.55 Gbits/sec[ 5] 4.00-5.00 sec 421 MBytes 3.53 Gbits/sec[ 5] 5.00-6.00 sec 410 MBytes 3.44 Gbits/sec[ 5] 6.00-7.00 sec 403 MBytes 3.38 Gbits/sec[ 5] 7.00-8.00 sec 411 MBytes 3.45 Gbits/sec[ 5] 8.00-9.00 sec 414 MBytes 3.48 Gbits/sec[ 5] 9.00-10.00 sec 414 MBytes 3.48 Gbits/sec[ 5] 10.00-10.04 sec 16.8 MBytesComments
Challenge your reflexes and dexterity with our definitive Click Speed Test. How fast can you click? Join the ranks of elite clickers and set your personal best! 1 sec 5 sec 10 sec 15 sec 20 sec 30 sec Test time seconds Clicks Clicks per second cps Clicks per minute cpm Click the + button to start: Using the CPS Test:Choose a test duration in seconds or select a preset option.Rapidly hit the + button or spacebar until the timer runs out.Check your results for clicks per second (CPS) and clicks per minute (CPM).Hit the × button to start over. How many clicks is 1 cps?The click-per-second challenge starts similarly to other modes, such as clicks in 5, 10, or 60 seconds. However, in the 1-second version, players must act quickly and continuously click without pausing. Typically, most participants achieve a rate of 8-10 clicks per second. See also Bar Graph MakerClick CounterCPS TestLine Graph MakerNotepad HelpOnline CameraOnline NotepadPie Chart MakerRuler cm/mm online, actual sizeRuler inchesScatter Plot MakerScoreboardTable Chart MakerToday's DateTone generatorWebcam mirror online
2025-04-09Anyone that was involved be involved with my accounts in any capacity? + Regulation Violations - Other Regulatory Agencies No SEC ADV Part 1 | Item 11.D.25.22% of firms report this disciplinary action (SEC data, Jan. 2024)What does this mean?A federal regulatory agency, a state regulatory agency, or a foreign financial regulatory authority other than the SEC or CFTC has found firm or an advisory affiliate to have been involved in a violation of investment-related statutes or regulations.Questions to askWhat happened? When? How many times did it occur? Will anyone that was involved be involved with my accounts in any capacity? + Regulation Violations - Court No SEC ADV Part 1 | Item 11.H.1.B0.31% of firms report this disciplinary action (SEC data, Jan. 2024)What does this mean?A domestic or foreign court has previously found firm or an advisory affiliate was involved in a violation of investment-related statutes or regulations.Questions to askWhat happened? When? How many times did it occur? Will anyone that was involved be involved with my accounts in any capacity? + Registration/License Revocation - Other Regulatory Agencies No SEC ADV Part 1 | Item 11.D.51.68% of firms report this disciplinary action (SEC data, Jan. 2024)What does this mean?A regulatory agency has previously denied, suspended, or revoked the firm’s or an advisory affiliate’s registration or license or otherwise restricted their activities.Questions to askWhat happened? When? How many times did it occur? Will anyone that was involved be involved with my accounts in any capacity? Conflict alerts report_problem Alerts identified (1) Our system has identified the following conflict alerts. Click on the + to learn more about each item. Disclosure + 12b-1 Conflict Ask Firm* SEC ADV Part 2What does this mean and why is this important?Firm offers mutual funds that carry 12b-1 fees, which increases the total annual cost
2025-04-14AdvisorSearch.org is committed to the highest ethical standards and reviews services independently. Learn How We Make Money HS Management Partners, registered in 2007, serves 16 state(s) with a licensed staff of 1 advisors. HS Management Partners manages $1.5 billion and provides investment advisory services for 140 clients (1:140 advisor/client ratio). Overall info 5.0 Firm information Summary Average Client Balance $11.1 million Assets Under Management $1.5 billion Advisor/Client Ratio 1:140 Website Visit Site Main Office Address 640 Fifth Avenue, 18th Floor. New York, NY 10019 Registration Jurisdiction SEC Form CRS (Client Relationship Summary) View Filing SEC Filings View Filings verified_user Trust AlgorithmOur searchable database of U.S.-based financial advisors includes more than 17,000 firms across the country. Each month, AdvisorSearch.org downloads the latest regulatory data from the SEC IAPD database. This data is then run through our proprietary Trust Algorithm to generate a star rating for each firm based on a variety of measures, including disciplinary history and conflicts of interest.As a Certified B Corporation™, our focus is simple: people before profits. Each month, AdvisorSearch.org serves as a trusted resource to help thousands of Americans research and compare financial advisors.Disciplinary alerts check_circle No alerts identified Our system found no disciplinary alerts. Checks take place monthly. Click on the + to learn more about each item. Disclosure + Activity Restriction - SRO No SEC ADV Part 1 | Item 11.E.42.13% of firms report this disciplinary action (SEC data, Jan. 2024)What does this mean?Firm or one of its employees previously has been subject to a suspension or expulsion or other restriction of activities by a Self-Regulating Organization or commodities exchange.Questions to askWhat happened? When? How many times did it occur? Will anyone that was involved be involved with my accounts in any capacity? + Attorney/Accountant Authorization Revocation No SEC ADV Part 1 | Item
2025-04-08If you have the Symbolic toolbox, then you can download the MATLAB install it with the symbolic toolbox. If you already have MATLAB installed, then you can click you can click Add-ons and search for the symbolic toolbox and install it. % Ensure the Symbolic Math Toolbox is availablesyms v(t)% Define the ODEode = diff(v, t) == -0.5*v + sec(t) + tan(v);% Specify initial conditioncond = v(0) == 0;% Solve the ODEsol = dsolve(ode, cond);% Display the solutiondisp('The exact solution is:');disp(sol);% Ensure the Symbolic Math Toolbox is availablesyms v(t)% Define the ODEode = diff(v, t) == -0.5*v + sec(t) + tan(v);% Specify initial conditioncond = v(0) == 0;% Solve the ODEsol = dsolve(ode, cond);% Display the solutiondisp('The exact solution is:');disp(sol);% Optionally, convert the solution to a function for further usev_exact = matlabFunction(sol); ode = diff(v, t) == -0.5*v + sec(t) + tan(v);sol = dsolve(ode, cond);Warning: Unable to find symbolic solution.disp('The exact solution is:');v_exact = matlabFunction(sol); ode = diff(v, t) == -0.5*v + sec(t) + tan(v);sol = dsolve(ode, cond);Warning: Unable to find symbolic solution.disp('The exact solution is:');ode = diff(v, t) == -0.5*v + sec(t) + tan(v);sol = dsolve(ode, cond);Warning: Unable to find symbolic solution.disp('The exact solution is:');v_exact = matlabFunction(sol) % Clear workspace and command windowclear; clc;T==2; %Final time% Define symbolic variablessyms v(t) % Define the ODEode = diff(v, t) == -0.5*v + sec(t) + tan(v) - (exp(-t) + v + int(v^2, t, 0, t));% Specify the boundary conditioncond = v(0) == 0;cond = v(T) == 1;% Solve the ODEsol = dsolve(ode, cond);% Display the exact solutiondisp('The exact solution is:');disp(sol);
2025-04-15